Planning a temporary floor protection project involves more than ordering the correct number of Correx boards. Professional contractors also consider tape, waste, deliveries and site logistics before work begins.
This is a simple framework for estimating your project while linking to detailed resources for each topic.
1. Estimate Your Correx Requirements
Everything starts with the area you need to protect. You are protecting both the space, and yourself. See HSE guidelines here.
Calculate floor area, allow for cuts and waste, then determine how many standard 2400 × 1200mm boards you'll need.
Of course, we are speaking about Correx as a concept and not necessarily the original Corplex. The same applies to TI-Pro Correx materials too.
Read: How Many Correx Boards Do I Need?
2. Estimate Your Tape Requirements
Tape is often forgotten until installation begins.
A useful planning rule is:
-
Approximately 5 metres of seam tape per Correx board
-
One 50m roll secures around 10 standard boards
This helps estimate tape alongside your board order rather than as a last-minute purchase.
Read: Which Tape Should You Use with Correx?
3. Budget for the Whole Project
Floor protection costs are made up of more than boards.
Consider:
-
Correx boards
-
Seam tape
-
Waste allowance
-
Delivery
-
Storage
-
Reuse potential
Buying compatible products together can often reduce overall project costs and minimise delays.
Read: UK Correx Price Comparison
4. Avoid Common Planning Mistakes
The most common issues we see include:
-
Underestimating tape requirements
-
Ordering too few boards
-
Choosing the wrong tape for delicate surfaces
-
Forgetting delivery lead times
-
Not allowing for waste on complex layouts
Each is easy to avoid with a little planning before materials arrive on site.